A Quality DVR for Your Thermal Scope or Digital Night Vision Device
The UNV - MVDR is available with connectivity solutions for virtually every thermal imaging and digital night vision device that supports a standard NTSC/PAL video output. Options include custom rugged video cables for the ATN ThOR, IR Hunter, Pulsar Digisight, Sightmark Photon, FLIR RS series and more! We are continually adding video cable options to our line of custom rugged video cables. If you do not see a video cable for your device please contact us.
One Button Operation Video Recording Solution
The UNV MDVR features a trigger switch that allows the user to power the MDVR on and start recording in under 5 seconds(on position). The 2-position trigger switch will also stop the MDVR during recording and power the MDVR off when flipped the opposite direction(off position). This is a critical feature to capture footage in the field for 2 reasons. First, instead of fumbling for the power button and then the record button, or looking for a loose remote or fob, the trigger switch takes care of both of those functions with a simple flip of a switch that takes less than 1 second. The trigger switch can be mounted in a variety of places which allows the user to configure the activation to their liking. The trigger switch can be flipped quickly for a slightly audibly click, or can be flipped slowly for no audible click, but always offers a positive position change report to the tip of your finger. The trigger switch also has a raised indicator bar on the side of the switch that powers the MDVR on, just in case you need to confirm the MDVR is on or off. Second, opening the recorder pouch is a bad move in the field especially during a stalk or just before a shot. Opening the recorder pouch will allow light from the MDVR's LCD display to get you busted by that big hog or give your position away to that wise old coyote you were just about to have a shot on. It's also unnecessary movement and wasted time which decrease the likelihood of a successful stalk. The trigger switch takes care of these problems and offers a hassle-free solution. All you need to do is make sure your scope is connected to the MDVR and the MDVR is configured correctly before your hunt. You won't have to fumble in the dark looking for a record button, fob or expose the display causing you to miss the video that you wanted to capture.
Cable Quality, Customization, and Orientation
Here are UNV we are avid night hunters, and we have been at the forefront of designing and developing quality custom video cables for a wide variety of thermal night vision scopes. After years of testing, broken cables, and missed video opportunities we have developed a line of rugged and reliable video cables for thermal and digital night vision scopes. We use only the best multi-strand copper cable components and assemble each cable with an extremely high standard for quality assurance and attention to detail right here in the USA. Each cable assembly has be thought through, tested in the field, modified, and improved upon to create the most rugged and easy to use cabling for your night hunting needs. You will notice that our line of custom cables come in various lengths and orientations depending on the device that the cable is intended to be used with, and these customized solutions all have a reason - to make recording video easy and reliable.
A Quality Mini DVR
There are a wide variety of mini DVRs on the market today that are constructed with cheap plastic and don't handle recoil. From the cheapest DVRs to the DVRs over $500, we have tested them all and are proud to say the MDVR is just as good if not better! The MDVR housing edges are made of aluminum for reinforced stability around the micro LCD display. When a DVR is going to be taken into the field night hunting it needs to be rugged, and the aluminum housing edges offer a more rugged design. The buttons are low profile and located on the bottom of the housing to reduce the overall size of the MDVR and reduce inadvertent activation. Other DVRs require an external microphone, but the MDVR offers an internal microphone with external microphone capabilities(we recommend level 2 or 3 out of 10).The MDVR also had an LCD off function that automatically turns the LCD off after 10 seconds. The LCD off function is very useful for night hunting because it reduces your visible signature to almost nothing, and also saves battery life for extended use. We have tested many different types of DVRs in the field, and the MDVR is by far the most reliable, feature rich, and easy to use.
USB Charging Cable
USB Data Cable
USB Wall Charger Adapter
Video Cable(split RCA male video, 5v 2.1mm power, RCA male audio)
Velcro to attach trigger switch
Velcro to attach pouch